00
Allison XB2003
10 250 Evinrude |
30
Merc ET, 12" Hydrodynamics manual, MK Maxxum. Prop is 1.25"
above pad. 99 mph @ 6200 rpm. "Still working on setup. Prop needs
to be higher above pad. Would like a prop with more lift at neutral
trim." |
Aj06bolt12r
- TN |
20
Allison XB21
Elite
21 300 Merc |
31
Merc prop, Bob's hydraulic, Lowrance electronics, MK Fortrex 80#. 95.9
mph @ 6400 rpm. "Best bassboat setup I've ever fished. This one is
a single console. Fishes like a gem. Plenty room and wide enough to
really fish on a daily basis.Speedy enough to stay interested. Congratz
Allison family you've outdone yourselves." |
Jazzyjeff
- FL |
17
Allison 21XB
Pro Elite BassSport
17 250 Merc |
29
Bravo, CMC hydraulic jackplate, running 4 HDS121 Carbons, MK Ultrex
112#, Lithium Pros 110au starting, 4 Lithium Battle Born batteries. 175
Sportmaster lower unit. 88 to 92 mph @ 6200 rpm. |
WillYarbrough
- AL |
98
Allison XB2003
97 225 Mariner |
30
Chopper, Allison 12.5" jackplate, Garmin electronics, Johnson TM.
Propshaft is even with pad. 98 mph @ 7200 rpm gps. "Great boat for
comfort, safety and performance." |
GMorgan
- AL |
92
Allison XB2002
01 250 Merc |
32
Lightning ET, 10" HydroDynamics, MinnKota 70#. Propshaft is 1
1/4" above the pad. 100+ @ 6150 rpm gps. |
Big
Bad Wolf - FL |
95
Allison XB2003
99 225 Merc
Pro Max |
30
Spinelli, 14" HydroDynamics. Propshaft is 1/4" below the pad.
93 mph @ 6500 rpm gps. |
Rockyriver
- OR |
96
Allison XB2003T
99 225 Merc
Pro Max |
27
Trophy, 14.5" Allison jackplate, Lowrance Elite7 HDI, MK Terrova
80#. Propshaft is 1/4" below the pad. "I've been wanting an
Allison for 20 years. This boat is Awesome!!" |
LiveToDrive76
- SD |
76
Allison XST
86 115 Merc |
Hydraulic
jackplate, HB535, BottomLine 480, Motorguide. |
John
R - TN |
94
Allison 2003XB
13 200 Merc |
26
Cleaver, 6" CNC hydraulic, Lowrance X71, 320, 65# TM. 92 mph @ 7500
rpm gps. |
Promax
2.5 - OH |
96
Allison XTB21
09 225 Merc
Pro Max |
26
Trophy, manual jackplate, 2 Lowrance HDS7 Gen2's, MK Fortrex. Propshaft
is 1" below the pad. 80+ mph @ 6800 rpm gps. "Only had it on
the water twice. Still learning to drive an Allison. Should do close to
90." |
Willyhicks
- VA |
00
Allison XTB21
00 200 Evinrude
XP200 |
27
Hydromotive, 10"hydraulic jackplate, Evinrude TM. Propshaft is even
with bottom of pad. 85+ mph @ 6300 rpm. |
Mbacon3227
- AL |
03
Allison XB21
BasSport 2+2
05 225 Merc 2.5
Optimax XS |
25
TXP OT4, 8" hydraulic jackplate, Lowrance HDS5 Gen2, Garmin 240,
Evinrude 24V TM. Propshaft is 3/8" above the pad. 82.7 mph @ 6500
rpm gps. |
Tritontr21
- TX |
91
Allison XTB21
94 260 Merc |
28
Mazco, 6" Allison jackplate, 2 Lowrance HDS8's, Motorguide 56#.
Propshaft is 1/2" below the pad. 103.11 mph @ 8800 rpm gps. |
Fastallison21
- TN
|
94
Allison XB2003
98 200 Merc |
26
DP4, 15" Allison manual jackplate, Humminbird electronics,
Motorguide Brute 56#. Propshaft is 1/4"below the pad. 88 mph @ 7200
rpm (gps). "Still working on setup, DP4 26 carries the load good!
30 gal of fuel, ice chest, 3 batteries, rods, tackle loaded. Windshield
on." |
Fishonalli
- AR |
13
Allison XB21
BasSport Pro
10 250 Merc
Pro XS |
28
Bravo 1, CMC hydraulic jackplate, two Humminbird 898c SI's, MinnKota
Fortrex 80#. 83 mph @ 6200 rpm (gps). "Titus Grisham nosecone and
torque tab. Working on getting right setup. Hitting rev limiter
now." |
JWW8
- AL |
11
Allison BasSport
Pro Elite
09 250XS Merc |
30
Bravo1, hydraulic jackplate, Lowrance HDS8 Gen2, HDS10 Gen2, MinnKota
Fortrex 80#. 89.2 mph @ 6100 rpm (gps). "Sportmaster lower unit and
prop modified by Lee Sanderson." |
Volfan#10
- AL |
97
Allison ZX2003
04 225 Merc
Optimax |
28
Trophy Plus, HydroJack hydraulic, MinnKota 74#. Propshaft is 1"
below the pad. 78 mph (gps). "Tourney loaded performed great,
handled better than I expected. Looking to try 30" prop." |
Dubiexb03
- LA |
98
Allison XB2003
98 225 Merc
Pro Sport |
MinnKota
Fortrex. 92.7 mph @ 6700 rpm (gps). Setup by Lee Sanderson at Sanderson
Marine, a smart guy with Allisons. |
Mike
- VA |
98
Allison XB2003
99 280 Merc |
28
Ally cut chopper, 14.5" Allison jackplate, OMC TM. Propshaft is
.25" below the pad. 103 mph @ 7750 rpm (gps). "Best I've ran
to date was 100 even GPS just to say I did it @ 7500 rpm, but boat had
some more but I did not at the time lol! Love these Allys" |
Woundedwarrior
- KY |
77
Allison XST
86 140 Evinrude |
22
Raker. 71 mph @ 5600 rpm (gps) |
P
Marchand - LA |
99
Allison XB2003
06 225 Merc
Pro Max
|
30
Signature prop, 14" Allison jackplate, Humminbird GPS on console,
Garmin on bow, Motorguide 71# TM. Propshaft is 1.5" below the pad.
97 mph @ 6800 rpm (gps). "I can't drive this boat that fast yet,
but I've seen it done. I would like any info on learning how to drive
it. Everybody tells me I'm gonna do a backturn. I love this boat but I
just need seat time." |
C150
- OK
PHOTO |
98
Allison 2003XB
99 225 Yamaha
VMax |
27
Tempest, 10" Rapid Jack, Johnson TM. 86 mph @ 6200 rpm (gps). |
CoCo
- LA
PHOTO
PHOTO |
93
Allison Drag
97 Merc Drag |
28
Ally cut chopper, 6" Allison jackplate. Propshaft is 1/4"
below the pad. 123 mph @ 9200 rpm (gps). |
Suicidealli
- KY |
92
Allison
XB2002 Comp
98 Mariner Drag |
26
ET cut chopper, 10" Allison jackplate, Allison 12/24V TM. Propshaft
is 3/4" below the pad. 116 mph @ 9200 rpm (gps). 1.75 gears in
lower unit." |
Suicidealli
- KY |
79
Allison XST18'
77 115 Merc |
21
prop, Motorguide 67#. |
Allirule
- VA |
89
Allison XTB21
90 260 Merc |
26
Trophy Plus, 10" Rapid Jack, Lowrance 135, OMC 24V TM.
Propshaft is 1/4" below the pad. 92.7 mph @ 7600 rpm (gps).
"2.4 Bridgeport center horn, dig pcu, diamond flywheel, rev limiter
set @ 8400." |
Ally
Bama - AL |
91
Allison
96 225 Merc
ProMax |
27
Chopper prop, 8" Allison jackplate, PinPoint electronics,
Motorguide TM. "First Allison, been in water 3 times since I bought
it (11/11/11). Trying to learn to drive an Allison." |
Tommysullins
- AL |
05
Allison
Grand Sport
06 250 Merc |
28
Hydromotive prop. 100+ mph @ 7000 rpm (gps). |
Ezguy
- WV |
82
Allison XST
86 200 Johnson GT |
24
Chopper, 6" Rite Hite jackplate. Propshaft is 5" below the
pad. 71 mph (gps). "Still working on setup and trying new
props." |
Durandbagwell86
- SC |
98
Allison XB2003
98 225 Merc
Promax SS |
30
Mazco, 14.5" Allison/Land&Sea hydraulic jackplate, Lowrance,
Garmin electronics, OMC 24V TM. Propshaft is 1/4" below the pad. 97
mph @ 7000 rpm (gps). |
Resqu-u
- NC
PHOTO
PHOTO |
06
Allison XB21
BassPro
07 300XS Merc |
28
Pro ET, 30 Mazco RE, 8.5" CMC hydraulic jackplate, Garmin
electronics, Motorguide Digital 71#. 94 mph @ 6150 rpm (gps). |
Allyxb
- TN |
86
Allison XTB
225 Merc
Pro
Max |
26
Trophy, 5" Bob's jackplate, Johnson 58# TM. Propshaft is 1"
below the pad. |
Liquid
Lightnin - FL |
97
Allison XB2003
04 225X Merc |
"Picking
up the motor Nov., I'll fill in the details when I know more." |
Ssv1761982
- OH |
06
Allison XB21
2+2
05 250 Merc |
27
Merc, CMC hydraulic jackplate, Humminbird 778C, Garmin 240, Motorguide
Pro 82#. 89.1 mph @ 6250 rpm (gps). |
Rward69
- NC
PHOTO |
95
Allison XB2003
96 245 Yamaha |
28
Hydromotive, 6" T-H Marine hydraulic, Garmin, Eagle 350, Motorguide
Tour 82#. Propshaft is 1/4" below the pad. 89.97 mph @ 6400 rpm
(gps). "Engine built by HydroTech, 2.6 liter. 259.7 hp at the crank
on dyno, about 245 at the prop. |
Jay
Martin - MS |
89
Allison XTB-21
94 150 Merc
Pro
Max |
24
Trophy, manual jackplate, Evinrude TM. |
Ocktane
- WA |
85
Allison XTB
95 200 Merc |
27
Hoss 4 blade, manual jackplate, Lowrance 527, Eagle 520, MinnKota TM.
Propshaft is 1/2" below the pad. 75 mph @ 5800 rpm (gps).
"Speed loaded with 2 people and gear; more there, just need to
tweak a little more." |
Nick
M - OK |
08
Allison XB-21
BasSport 2+2
96 225 Merc
ProMax
Updated 2/26/11.... |
25"
Tempest Plus, 8.5" CMC hydraulic, Lowrance HDS-7, Garmin 160,
Motorguide Digital 82#. Propshaft is 2" below pad.
75 mph @ 6200 rpm (gps). "This is the most incredible boat I have
ever experienced. Traded in my Astro and kept the 200 EFI (no cone or
LWP) and that little engine makes this 21' hull jump out of the hole.
Nosecone and LWP run at 1/2" below pad would surely hit 80 easily.
The solid feel of the hull, the quality of the layout and interior, vast
storage compartments and decks and dual consoles put this boat in a
class by itself."
"The 200 EFI is gone and the 225 ProMax is awesome! Added a set of
2" setback spacers between the CMC and the engine for a total of
10". Killer holeshot and great top end. Love this combo!!" |
Allyfishing
- PA
PHOTO
PHOTO
PHOTO |
90
Allison 2002XB |
28"
Chopper, Allison jackplate, Humminbird 161, 797CI, |
Lilmule
- TN |
96
200 Johnson |
MinnKota
70#. Propshaft is 1/2" below the pad. |
|
|
93.2
mph @ 6150 rpm (gps). "Former owner drove it to that |
|
|
with
slightly bumped timing and a 29, here on KY Lake one |
|
|
cannot
normally open one up." |
|
99
Allison XB2003T |
28"
Chopper, 14" Allison jackplate. Propshaft is 3" below the |
T
VandenHeuvel - WI |
97
150 Yamaha |
pad.
80.1 mph @ 5900 rpm (gps). "Ran this speed with three |
|
|
batteries,
trolling motor and fully loaded. Had 2002 Yammi HPDI |
|
|
150
on but could only reach 72 mph @ 5400 rpm (25 Renegade), |
|
|
now
runs 78.3 with the 25 Renegade at 6000 rpm with a lot more |
|
|
acceleration.
Anything above 75 mph the boat is a handful. |
|
|
Seems
like I have to trim it very high to get the last 5 mph out of |
|
|
it.
Would greatly appreciate any setup tips. Tried Jaco; wouldn't |
|
|
give
me time of day." |
|
92
Allison XTB-21 |
30"
Lightning ET, 10" jackplate, Lowrance 320C, Motorguide. |
Mark
- TN |
01
225 Merc |
Propshaft
is 3/4" below the pad. 91 mph @ 6900 rpm (gps). |
|
ProMax |
"I
love my Allison, this is the best all around boat for anyone, |
|
|
go
fast, fish and cruise! I just wish we had more open water up |
|
|
here
to open her up more." |
|
97
Allison XB2003 |
"Love
my Alli. It is fun to drive and I can still take the family out |
Padura
- LA |
97
280 Merc |
to
the lake on Sunday. I can fish the other days and it runs like a |
|
|
scawlded
dog." |
|
95
Allison XB2003 |
12"
Rapid Jack, Garmin electronics. "Just got it last week in |
Killah
- LA |
97
225 Merc |
January
(09). Learning to drive it." |
|
89
Allison XB2002 |
28"
Chopper, 5" CMC hydraulic, Humminbird electronics, |
Scott89alli
- KY |
97
225 Merc |
Motorguide
Magnum. Propshaft is 1" below the pad. |
|
ProMax |
83.1
mph (gps). "Just got this boat (7/26/08), still learning to drive |
|
|
it,
should run low to mid 90's when I get the setup right and get |
|
|
more
seat time. This boat is a blast...havin' fun." |
|
88
Allison XTB |
26"
Raker, manual jackplate, 12/24 Johnson TM. "I love my |
Darrell
- TN |
00
225 Johnson |
Allison
but I'm getting some prop work done. Any helpful info |
|
|
will
help." |
|
97
Allison XB2003 |
28"
Chopper II, Allison 10" jackplate + 4" Land & Sea
hydraulic. |
2HOT4U
- LA |
ProSport
Tournament |
Propshaft
is 1/2" below the pad. 90 mph @ 7200 rpm (gps). |
|
97
225 ProMax |
"Speed
is with 2 people loaded to fish." |
|
94
Allison XB2003 |
27"
Mazco HP4, 26" ET Cut Chopper, 14" Allison jackplate, |
K-DAWG
- GA |
91
200 Merc |
Garmin 298C, Zercom flasher,
Motorguide
24V 67#. Propshaft is |
PHOTO
PHOTO |
Updated 1/15/08.... |
1/4" below the pad.
87.5
mph @ 6700 rpm (gps). "Best riding, |
PHOTO |
|
handling and
responsive
boat I have ever drove or rode in." |
|
07
Allison BasSport |
24"
Merc, 12" C and C, Garmin electronics, Motorguide TM. |
Fast
Eddie - IL |
07
300 Merc |
94
mph @ 6300 rpm (gps). "Looking for the right prop and just |
|
|
to
BS." |
|
98
Allison XB2003T |
Several
props - 22" to 31", Yamaha drags/ET's/Trophies, |
RB
in NM |
99
300ish Merc |
14"
Detwiler hydraulic, MinnKota Maxxum 74#. |
PHOTO
PHOTO |
ProMax |
Propshaft
is even to 1/2" above. 103.6 mph @ 4500 elevation |
PHOTO
PHOTO |
|
(gps)
@ 8300 rpms. "It's the first XB-03 I've owned, 4th |
|
|
Allison,
very happy with all aspects for my uses. I fish, ski and race |
|
|
this
boat. The ProMax has been built to the hilt by JSRE with |
|
|
influences
from John Marles, Tony Brucato, Eric Simon and other |
|
|
super
people. To date I have run top end of 103.6 a testament to |
|
|
the
ability of a steel sleeve Pro Max. There is more to be had at |
|
|
sea
level, a lot. The sweet thing about the "Fishing Bote" as they |
|
|
call
it during race announcements is, take out extra batteries, lose |
|
|
some
fuel, changed heads, increase fuel pressure, prop, dump |
|
|
extra
weight and hurt some V8 boy's feeling on the 1/4 mile. |
|
|
This
boat took High Points in SWDBA in 2005, a 'Fishing Bote'..." |
|
07
Allison XB21 |
28"
FNR prop, hydraulic jackplate, Garmin 378C, 250C. |
Hollywood
- NC |
Bassport Pro Elite |
Motorguide
82# Tour. |
|
06
250XS Merc |
|
|
98
Allison SS2000 |
28"
Chopper cut into an ET, 9.5 Allison jackplate. |
SS
Ally - KY |
91
260 Merc |
Propshaft
even with pad. "My Dad has owned Allisons since I was |
|
|
2.
This is my 2nd Allison and love it. It gets a lot of looks on and |
|
|
off
the trailer." |
|
79
Allison 17 |
42
mph (gps). "First boat I had ever bought and we love it, for
a |
Mk2spitfire
- TN |
85
85 Johnson |
small 85 hp
motor it still out runs and out accelerates all my mates |
|
|
boats
(except anything too huge) but we love it and wouldn't get |
|
|
rid of it
for anything. We even bought a pontoon boat and still take |
|
|
the
Allison to the lake so we can have a quick runaround too!" |
|
98
Allison XB2003 |
30"
Spinelli 4 blade, 13" custom made jackplate, Lowrance X91's |
LJ
Giroux - CA |
98
335 Merc |
(2),
Motorguide 75#. Propshaft is even with the pad. |
|
Offshore |
105+
@ 8-9000 rpm (gps). "Best bass boat I have owned, have |
|
|
yet
to be out run even in the 80s rough water not a problem. |
|
|
After
learning how to drive the boat, ok the race boat. Some ask |
|
|
why
the hi hp, it gets you to speed a lot quicker, 105 thus far. |
|
|
The
boat can go more,don't know if I can. 28" 3 blade Merc race |
|
|
prop
11,000 rev limiter stands the hair up on my neck, how fast |
|
|
can
this thing go." |
|
99
Allison XB2003 |
29"
Mazco RE3, 14" Allison/CMC hydraulic, Lowrance X85, |
Swimbaitkid
- CA |
99
225+ Merc |
X135,
MinnKota Maxxum 74#. Propshaft 1/4" above the pad. |
PHOTO
PHOTO |
Pro Max Sport |
93
mph @ 7000+ rpm (gps). "This is an awesome boat to drive |
PHOTO
PHOTO |
|
and
fish, I am always surprised by owners of other brands when |
|
|
they
say Allisons can't run in the nasty water. All I can say is don't |
|
|
knock
it will you ride in one, they run like a dream. I love my Alli." |
|
96
Allison XB2003T |
28"
Hydromotive O/T, 13.5" Allison & CMC hydraulic, |
Ricky
S - FL |
97
225 Mariner |
Lowrance
70A, Humminbird SX100, Evinrude TM. |
PHOTO
PHOTO |
Super Magnum |
Propshaft
is 1/4" below the pad. 90 mph @ 6800 rpm (gps). |
PHOTO |
|
"The
Allison has been a blast to drive. Had the sportmaster lower |
|
|
unit
modified with the Allison cut and torque tab by Remco Props, |
|
|
now
have very little torque at speed. I am always surprised by |
|
|
owners
of other brands when they say Allisons can't run in the |
|
|
nasty
water. All I can say is don't knock it till you ride in one. |
|
|
It's
always fun to go fishing and wind up racing without changing |
|
|
props.
What else can I say. Love my Ally." |
|
77
Allison Craft |
Mercury
Thruster Plus TM. |
H
& J Parkinson - KY |
77
175 Merc |
|
|
02
Allison XB2002 |
28"
Merc Chopper, 5.5" CMC hydraulic, Lowrance 320's (2), |
Ally01
- AR |
89
245 Merc |
MinnKota
Maxxum Pro. Propshaft is 1/4" above the pad. |
|
Bridgeport |
95
mph @ 7800 rpm (gps). "Just about to get this thing dialed in. |
|
|
I
love my Allisons." |
|
92
Allison 21 XTB |
6"
jackplate, Lowrance X70, X49, Motorguide Digital 86#. |
KenS
- GA |
Tournament |
"Only
had boat about a month. Only had it out on a lake big |
PHOTO
PHOTO |
92
200 Mariner |
enough
to really open her up once. Man this thing is fast. It really |
PHOTO |
|
fishes
good also. I am looking forward to lots of great days on the |
|
|
water
with this baby. It is really fun to operate." |
|
03
Allison XB21 |
27"
Trophy, 8.5" CMC hydraulic, Garmin 168 GPS, 240, |
V6MERC
- MO |
BasSport Elite |
Motorguide
TM. "This is the most awesome boat I've ever |
PHOTO
PHOTO |
03
250XS Merc |
experienced!!
The quality that Allison put in their boats is "second |
PHOTO |
|
to
none" in my opinion!! It does excellent in rough water...and
it |
|
|
will
fly when you want it too. I don't have enough seat time yet to |
|
|
give
top speed and WOT numbers yet, I'm still learing and |
|
|
grinning
from the first time I got her up on the pad!! |
|
|
This one is gonna be a keeper...." |
|
91
Allison XB2002 |
29"
Mazco, 10" Allison, Gaffrig/Mercury, Motorguide TM. |
Shook
- NC |
00
Merc |
122.4
mph @ 9100 rpm (gps). |
PHOTO
PHOTO |
|
"World
record holder, Bassboat Unlimited." |
PHOTO |
90
Allison XTB21 |
27"
Hydromotive TX-4, 10" S&R jackplate, Eagle 9000Z, |
Mbacon3227
- AL |
90
200 Evinrude XP |
Eagle
7200, Evinrude 44# TM. Propshaft is 1" below the pad. |
|
|
80-85
mph @ 6000 rpm (gps). |
|
96
Allison ZX2003 |
29"
SRX, 10" Land & Sea hydraulic, Propshaft even with pad. |
JerryL
- SC |
04
150 Merc |
84
mph @ 5600 rpm (speedo). 84mph, solo, loaded, 1/2 full of |
|
|
fuel....I'm
still looking for more speed with different prop setups." |
|
02
Allison XB2003 |
27"
Trophy, Allison & CMC jackplates = 14.5" hydraulic, |
JOEALLY
- AL |
01
200XS Merc |
Lowrance
X70, X85, OMC TM. Propshaft is 1/4" below pad. |
PHOTO
PHOTO |
Updated 11/6/05.... |
86.4
mph @ 6300 rpm (gps). "Speed with 2 men, full tourney |
PHOTO
PHOTO |
|
load,
best so far." |
|
95
Allison 2003T |
28"
Ally Cut Chopper, 13.5" Allison/Bob's hydraulic. |
BigRedAlli
- KY |
98
260 Merc |
Propshaft
1/4" below the pad. "Just bought this boat 9/11/04. |
|
|
Having
a blast learning to drive it!! BEST boat I ever owned..." |
|
00
Allison XB2003 |
28"
Hydromotive, 14" Allison jackplate, Eagle Cuda 168, |
Neal
- MS |
04
225X Merc |
Zercom
digital flasher, Motorguide 67. Propshaft is 1/4" below |
PHOTO
PHOTO |
|
the
pad. 94 mph @ 6850 rpm (gps). |
PHOTO
PHOTO |
97
Allison XB2003 |
28"
Chopper, 14.5" Allison jackplate, Motorguide 82# Tour. |
Stantonz71
- AL |
99
280 Merc |
Propshaft
is 5/8" below the pad. 101 mph @ 7750 rpm (gps). |
|
Updated
4/22/06... |
|
|
02
Allison XB2003 |
28"
Hydromotive Quad IV, 12" CMC and Allison jackplates |
Neil
- CA |
02
200 Merc XS |
manual & hydraulic. Propshaft is 1/4
- 1/2 below the pad. |
|
|
89.32
mph @ 6750 rpm (gps). |
|
03
Allison XB21 Elite |
27"
Hydromotive Quad 4, 8.5" CMC hydraulic, Garmin 168GPS/ |
Geno
Manneti - GA |
03
250XS Merc |
Locator
Combo, Garmin 140, MinnKota 74#. |
|
|
92
mph @ 5850 rpm (gps). "Has the much needed new Allison |
|
|
hydraulic
steering. Much easier to drive than previous XB2003, |
|
|
and
a tad faster." |
|
98 Allison
SS2000 |
30"
Lightning ET, 8" Allison jackplate. Propshaft is 3/4" below |
Sanadaracing
- Japan |
95? Merc |
the
pad. 98 mph @ 6800 rpm (gps). "Getting very close to |
|
|
hitting the
century mark. Not too bad for a motor that has been |
|
|
built from
all different parts sitting around in my friends' garages. |
|
|
BTW, I am a
Triton, Allison and a Norris Craft dealer in Tokyo." |
|
|
http://homepage3.nifty.com/POWERBOAT |
|
94 Allison
XB2002 |
28"
Chopper II, 7" Allison jackplate, Garmin electronics, |
Donavon
- LA |
96 225 Merc |
Motorguide
TM. Propshaft is 1/4" above the pad. |
|
ProMax |
97 mph @
6500 rpm (gps). "This is the first boat to rattle my nads. |
|
|
My family
is really hving a lot of fun with it..." |
|
03
Allison |
27"
Trophy, Garmin 168 (dash), Garmin 240 (bow). |
Jeff
- SC |
XB-21 Elite |
MinnKota 78
TM. Propshaft is .75" below the pad. |
PHOTO
PHOTO |
03 250XS
Merc |
"So
far 86.4 with full fuel & soaking wet from thunderstorm. |
PHOTO
PHOTO |
|
Have yet to
have favorable conditions for max speed. Very low |
|
|
hours on
engine and still getting comfortable with hyper velocity. |
|
|
Smoothest
ride I have ever felt. Super fast acceleration for 21+ |
|
|
footer.
Yes, I will update as I experience the full potential." |
|
96
Allison |
28"
Lightning ET, 14" Rapid Jack, Lowrance depth finder (dash), |
Curry
- LA |
XR-2002 Compro |
Lowrance
fishfinder. OMC TM. Propshaft is even with the pad. |
PHOTO |
96 225
Mariner |
97 mph @
6500 rpm (gps). "225 Super Mag is completely stock |
PHOTO |
|
and even
with the pad. Need bigger balls to go higher and faster." |
|
97 Allison
XB2003 |
26"
Chopper, 6" Allison hydraulic jackplate, MinnKota 74# |
KC
- LA |
97 200 Merc |
Maxxum.
Propshaft is 1/4" below the pad. |
|
ProMax |
88.1
mph @ 6440 rpm (gps). "That's one person (200 lbs) with |
|
|
a 74#
trolling motor, three big a*s batteries, full livewell, tackle |
|
|
box and rod
+ reels. Not bad for a 200! I'm fixing to put my |
|
|
motor in
the shop to see if they can't pep it up a little." |
|
79 Allison
SST |
70+ mph @
6500 rpm. "I had it about 75 mph then it started |
Blake
- GA |
79 150 Merc |
jumping off
of the water so I slowed down. Do you know how to |
|
|
trim the
motor so the boat won't jump?" |
|
01 Allison
2003T |
28"
Mercury Chopper II, CMC hydraulic, Lowrance X85, |
Kent
- MN |
01 280 Merc |
MinnKota
65# TM. Propshaft is 1/4" above the pad. |
PHOTO |
|
101 mph @
7700 rpm (gps). |
PHOTO |
|
"Top
speed achieved with trolling motor off, light load, cool air |
PHOTO |
|
and water
temperature. Nordskog digital gps speedo with memory |
|
|
works
great. Boat/motor purchased new from Jaco Marine - they |
|
|
added the
checkering. When running with trolling motor and |
|
|
fishing
gear I switch to 26" Chopper II - top speed then is |
|
|
96 and
bumping the rev limiter - this prop really accelerates nicely." |
|
98 Allison
XB2002 |
8"
Detwiler hydraulic, OMC 24V TM. |
Jerry
- NC |
99 280
Merc |
"Has
Nordskog gauges with Purple bezels with the exception of |
PHOTO |
|
the Mercury
Tach. Motor is all stock except had sportmaster |
PHOTO |
|
lower unit
modified and had the rev limiter reprogrammed. |
|
|
Boat looks
as good today as it did when I brought it home new." |
|
97 Allison
XB2002 |
27"
Chopper, 10" RapidJack, Garmin 160, Humminbird ID60, |
White
Ally02 - TN |
98 225+
Evinrude |
Motorguide
41#. Motor is 8.5" off the transom. |
|
|
"I
have only had her up to 6000 rpms, 78 mph by gps, not enough |
|
|
seat time
yet to open her up." |
|
00 Allison
2002XB |
30"
Merc Chopper II, 14" Allison jackplate, Lowrance 160 |
Joe
- FL |
225 Merc |
Sounder/GPS,
Motorguide GWB 80# TM. |
|
ProMax SS |
Propshaft
is 1/4" above the pad. "I just got the boat about
3 |
|
|
months ago,
need more fly time. I have driven the boat 80 on gps. |
|
|
I have a
question for other owners - is anyone using hydraulic |
|
|
steering?
Is so, please e-mail me and let me know the pros and |
|
|
cons." |
|
98 Allison
XB2003 |
28"
Hydromotive Quad IV O/T, 14" jackplate. |
Bass911
- VA |
200 Mariner |
Propshaft
is 1/4" below the pad. 92.8 mph @ 7150 rpm (gps). |
|
SuperMag |
"The
motor's been warmed up a bit. The 92.8 mph was with a |
|
|
lab
finished 30" Mazco RE. Cool Fall afternoon and the trolling |
|
|
motor
removed. 91.4 mph @ 7100 rpm with a "regular" load |
|
|
on the
boat. Just bought the boat in Feb. '02. Slung an ear off |
|
|
my prop in
May. Melted the #2 piston in June, (check fuel lines |
|
|
for holes,
can become a leaning air/fuel mix issue). |
|
|
It's been a
good year, had no idea so much has to be learned to |
|
|
go
fast." |
|
90 Allison
2002XB |
28"
Trophy, 9.5" jackplate. Propshaft is even with pad. |
Spencer
- LA |
93 260
Merc |
101.5 mph @ 7600 rpm (gps) |
|
Updated
12/28/04... |
|
|
98 Allison
XB2003 |
26"
& 30" Lightning, 15" Allison jackplate, Minnkota TM. |
Paul
- FL |
03 340 hp
Merc |
Propshaft
is 1.4" above the pad. 108 mph @ 8800 rpm (gps). |
|
|
"No
rev limiter, race heads with race fuel, SVS for drag motor. |
|
|
98 260 hp
block but everything else is new for drag motor or |
|
|
S3000." |
|
98 Allison XB2002 |
27" Trophy, 30" Mazco,
6" CMC hydraulic jackplate, |
Steve
- SC |
225 Merc |
Lowrance
LCX15MT, Lowrance X75. MotorGuide
Brute TM. |
|
Pro Max |
Propshaft is 1/4" below the pad. |
|
Updated 12/1/02.... |
94 mph @ 6100 rpm (gps). |
|
98 Allison XB2003T |
26" Merc Trophy, 28" Chopper,
21" High Five, 14.5" CMC |
Lou
- CA |
225
MarinerSS |
hydraulic jackplate, Lowrance LMS 350,
X85, |
|
|
Rockford-Fosgate Power 400.4, 500.2,
MotorGuide TE 767V. |
|
|
Propshaft is 1/2" below the pad. 92
mph @ 6800 rpm (gps). |
|
|
"Still learning from "seat
time" after 100 hours." |
|
99 Allison 2003PST |
28" Lightning ET, 12.5"
Allison jackplate, Lowrance X65, |
Merc225Pro
- TN |
225 Merc |
MotorGuide 767 TM. Propshaft is
1/4" above the pad. |
|
ProMax |
89.8 mph @ 6850 rpm (gps). |
|
|
"Moved jackplate to 14" and
trying more props, will update |
|
|
shortly." Click
here for pics and more details |
|
97 Allison XB2003 |
28" Trophy Plus, 8"CMC/6"
Allison hydraulic jackplate, |
ScottB
- LA |
225 Johnson HO |
MotorGuide 24V 750. Propshaft even with
the pad. |
|
|
90.1 mph @ 6700 rpm (gps). |
|
91 Allison XTB21 |
26" Laser II, 6" CMC
hydraulic, Humminbird WideEye, |
XTB21
Steve - AR |
150 Merc XR6 |
MotorGuide 60. Propshaft is 1"
below the pad. |
|
|
74.5 mph @ 6200 rpm (gps). "I also
have a bimini top and a ski |
|
|
pole that connects in the back seat
hole." |
|
95 Allison XB2002 |
29" Hoss Hyperdrive, 8"
Allison jackplate, MotorGuide 24V |
Johnnyracer
- FL |
94 260 Mariner SS |
Brute. Propshaft is 1/4" above the
pad. 7900-8100 rpm. |
|
98 Allison 2003T |
30" RE3 prop, 12.5" Allison
jackplate, Minnkota Maxxum 44#, |
WI2003
- WI |
225 Merc |
Propshaft is 1/8" above the pad. 90
mph @ 7000 rpm (gps). |
|
ProMax SS |
|
|
00 Allison XB2002 |
29" Hoss prop, 8" Allison
jackplate, MotorGuide 12V TM. |
Cliff
- OH |
280 Merc |
Propshaft is 1/4" below the pad. |
|
|
"New boat, haven't had a chance to
run it yet. " |
|
00 Allison XB2003T |
Trophy PVS/Lightning ET, 14.5"
Allison/CMC hydraulic jackplate, |
Grandlakegar
- OK |
Merc 2.5 |
Zercom RTS, Humminbirds (400TX &
WideVision), MotorGuide |
PHOTO |
280 hp |
46# Energy 12V TM. Propshaft is -
1/8" to + 1/2". 100 +?? mph. |
PHOTO |
|
@ 7750 rpm. "I love this boat/motor
combination. Looks GOOD, |
PHOTO |
|
sounds BAD, and it will FLY." |
|